Dock bumpers and approach systems

Rampex-Pro

The RAMPEX-PRO was developed to combine the positive properties of the common ramp buffers for dock levellers.

Its unique lamellar construction makes the RAMPEX-PRO the softest buffer with a steel front plate. The slats give it the damping properties of a pure rubber buffer and the steel front plate gives it a long service life.

  • Rampex-Pro

    • Product details
      • soft buffer thanks to the unique lamella construction
      • Combines the damping properties of the rubber buffer with the long service life of the steel front plate
      • S700MC steel instead of simple structural steel
      • Yield strength is 3 times higher
      • Styrene - butadiene rubber instead of a simple rubber compound
    • Product benefits
      • no moving parts
      • patented slat design
      • optimal load transfer
      • long life span
      • Made in Germany

    Nytrex dock bumper

    Nytrex is a high-strength plastic that is also used in crane construction. The material has unique advantages for dock bumpers. In addition to the very good visibility for truck drivers, the high strength combines with a sliding ability to give the dock bumper a very long service life. The Nytrex dock bumper lasts 7-10 times longer than rubber! The available dimensions are compatible with corresponding mounting plates for rubber bumpers. For a better spring effect, a rubber plate is inserted between the steel plate and the Nytrex material

    For telescopic lip levellers

    F513
  • Nytrex bumper 250 x 500

    • Product details

      130 total thickness, 250 x 500

    • Product benefits
      • Can be used in four ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
      • Compatible with rubber bumper mounting plate
    F512
  • Nytrex bumper 250 x 500 as a replacement solution

    • Product details

      Replacement solution without a weld-on plate

      120 total thickness, 250 x 500

    • Product benefits
      • Can be used in four ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
      • Compatible with rubber bumper mounting plate
    F713
  • Nytrex bumper 250 x 750

    • Product details

      130 total thickness, 250 x 750

    • Product benefits
      • Can be used in four ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
      • Compatible with rubber bumper mounting plate
    F7513
  • Nytrex bumper TwinSet

    • Product benefits
      • Can be used in four ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
      • Compatible with rubber bumper mounting plate

    For hinge lip levellers

    F508
  • Nytrex bumper 250 x 500

    • Product details

      80 total thickness, 250 x 500

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
      • Compatible with rubber bumper mounting plate
    F507
  • Nytrex bumper 250 x 500 as a replacement solution

    • Product details

      Replacement solution without a weld-on plate

      70 total thickness, 250 x 500

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
      • Compatible with rubber bumper mounting plate
    F708
  • Nytrex bumper 250 x 750

    • Product details

      80 total thickness, 250 x 750

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
      • Compatible with rubber bumper mounting plate
    F7508
  • Nytrex bumper TwinSet

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
      • Compatible with rubber bumper mounting plate

    NovoSlider

    NovoSlider combines the excellent properties of the Nytrex material with a long spring deflection and thus comes very close to the ideal for a dock bumper. The steel body is galvanised, which provides it with lasting protection against rust. Due to the lightweight rubber mat, the floating Nytrex material can achieve a maximum deflection of 25 mm and can follow the truck’s movements up and down.

    For telescopic lip levellers

    514
  • NovoSlider 250 x 500

    • Product details

      Movable, 140 total thickness, 250 x 500

    • Product benefits
      • Can be used in four ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
    714
  • NovoSlider 250 x 750

    • Product details

      Movable, 140 total thickness, 250 x 750

    • Product benefits
      • Can be used in four ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
    7514
  • NovoSlider TwinSet

    • Product benefits
      • Can be used in four ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level

    For hinge lip levellers

    510
  • NovoSlider 250 x 500

    • Product details

      Movable, 100 total thickness, 250 x 500

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
    710
  • NovoSlider 250 x 750

    • Product details

      Movable, 100 total thickness, 250 x 750

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level
    7510
  • NovoSlider TwinSet

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Version for installation above ramp level

    NovoSlider L swap body

    NovoSlider L is mounted above the edge of the ramp and thus prevents the vehicle from driving over the bumper without limiting the loading operations.

    L710
  • NovoSlider L

    • Product details

      Total thickness 100 mm

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Half width above ramp level
      • Up to 25 mm spring deflection
    L714
  • NovoSlider L

    • Product details

      Total thickness 140 mm

    • Product benefits
      • Can be used in two ways
      • High-performance plastic in signal yellow
      • Lasts 7 - 10 times longer than rubber
      • Half width above ramp level
      • Up to 25 mm spring deflection

    NovoLift

    NovoLift provides another way of preventing the vehicle from overrunning the dock bumper above the ramp level. A height-adjustable carriage made of steel is guided above the ramp level with the help of a pneumatic spring. After the truck has been docked, the operator can gently press the bumper down with his foot. In the lowest position, the whole carriage automatically locks into place. There is now no longer anything standing in the way of the loading operation. After loading, the carriage can easily be unlocked and runs automatically back to the top position.

    614
  • NovoLift

    • Product benefits
      • Height-adjustable dock bumper
      • No limitations when loading swap bodies
      • Lasts 7 - 10 times longer than rubber
      • Suitable for a high loading frequency
      • Multiple use 2D

    NovoEASY - Electronic approach system

    As an electronic approach system with a sensor and traffic lights, NovoEASY provides perfect collision protection and ensures that the truck stops shortly before the dock bumper. This avoids damages to the building, to the truck and to the dock bumper. The sensor, which is protected within a dock bumper made of high-performance plastic, measures the distance from the truck to the loading ramp and informs the driver of this via an indicator element (e.g. traffic lights).

    Product benefits:

    • High-performance plastic in signal yellow
    • Distance measurement (truck-building) with indication via external traffic lights

    You can find further information in the data sheet!

    Rubber bumpers

    The rubber bumpers consist of a high-quality new rubber mixture. They are particularly abrasion-resistant and have a spring deflection of up to 20 mm.

     

    For telescopic lip levellers

  • Rubber bumper, complete, 250 x 250 x 150

  • Rubber bumper, complete, 500 x 250 x 150

    For hinge lip levellers

  • Rubber bumper, complete, 250 x 250 x 100

  • Rubber bumper, complete, 500 x 250 x 100

    • Includes

      1x weld-on plate

      1x rubber bumper 500 x 250 x 90

      2x hexagonal nut M20

    • Article number

      DS9958010

       

       

    Steel bumpers

    The steel bumpers consist of galvanised steel with an internal rubber core. They have a spring deflection of up to 80 mm and are wear-free.

     

    For telescopic lip levellers

    DescriptionDimensionsArticle number
    Steel bumper AZJ 500500 x 250 x 200DS0390400
    Steel bumper AZJ 800 without back support800 x 250 x 200DS0390420
    Steel bumper AZJ 800 with back support800 x 250 x 200

    DS0390425

     

    For hinge lip levellers

    DescriptionDimensionsArticle number
    Steel bumper AZPK 500500 x 250 x 140DS0390450
    Steel bumper AZPK 800 without back support800 x 250 x 140DS0390460
    Steel bumper AZPK 800 with back support800 x 250 x 140DS0390465

     

    Product assessment

    Different loading situations require different dock bumpers. The right solution for the customer is crucial. Therefore, mydocking offers a wide range of different systems.<br/> Five different criteria provide help with the decision-making:

    CriterionDescription
    Building protectionIndicates how much the solution protects the building from collision damages.
    DurabilityInformation on the relative durability when the bumper is used properly.
    Spring deflectionThe longer the dock bumper’s spring deflection is, the more damages to the truck and the building are prevented.
    Life cycle costIn addition to the costs of materials for the dock bumper, the costs for the replacement of worn-out dock bumpers and their durability are also included in the assessment of the costs.
    VisibilityThe latest assessment criterion is the visibility of the dock bumper for the truck driver. As previous products, both rubber and steel bumpers, were almost always black, there was no distinguishing feature. This changed with the development of the Nytrex® bumper. The yellow colour provides significant advantages over the other systems. That is why this criterion has found its way into the assessment.

    The more stars a model receives in one of the criteria, the higher the quality of the product.

     

     

     

    info@mydocking.com

    +49 (0)511 76 36 79-0

    shop.mydocking.com